2. Cleaning
When this unit processes the paper output from digital color printer, toner sometimes attaches on
the surface of conveyer rollers. And if toner accumulates, the paper may get dirty with the toner
or it may cause fold skew. At times like this, clean the conveyer rollers according to the following
procedures.
1. Confirm that the control panel displays stand-by
screen.
Right illustration: When ‘JOB No.01’ is used.
2. Press the F key to display menu selection screen.
3. Press the CURSOR key (Down) several times to
select ‘Cleaning mode’.
4. Press the SET key to fix ‘Cleaning mode’.
2-1. Cleaning conveyer roller
Select menu
Setting
System
Cleaning Mode
To Next Page
Loading...
Need help?
General
