5. Open the top cover by holding the handle.
6. Wipe off the dirt on the conveyer rollers using a dry
and soft cloth or cloth tightly wrung out of water.
CAUTION
Never use alcohol or solvent cleaner.
It may tarnish or damage the exterior finish.
WARNING
During cleaning, extreme care should be
taken to prevent our hands or fingers from
being caught.
7. Close the top cover by holding the handle.
The conveyer rollers turn 60 degrees.
The entire roll is cleaned around its circumference
by opening/closing the top cover.
8. After cleaning the rollers, press the SET key.
Menu selection screen reappears.
To Next Page
Loading...
