FOLD2 area
Paper in m
Remove document
from exit area
J6:Exit area
When a paper jam has occurred in the Exit area of DC-F1, “J6:Exit area”” Remove document from
exit area” error is displayed and paper jam area flashes on the LCD panel. Remove the
document with the following procedures.
1. “J6:Exit area” error is displayed on the LCD panel.
2. Lift the lock lever to open the FOLD2 area.
3. Remove the jammed document in the exit area.
4. Close the FOLD2 area.
3-6. When a paper jam has occurred in the exit area
FOLD2 area
Pape
To Next Page
Loading...
Need help?
General
