Duplo DUPRINTER DP-440 - Page 258

260
c HELP Mode Function and Operation Procedures
chap.7
H-40
(1) Adjustment / specification settingHELP mode
ABCD Item Setting
0***
1***
**00
Normal
**01
**10
0000
*0**
*1**
Dark
Light
Not used
Photograph mode
Not used
Initial value
Modes H-38,H-39 are not used.
ePress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1)
Outline highlight setting
¡Following items are indicated.
A : (Not used)
B : (Not used)
C,D : Outline highlight (Scanner)
(1) Outline highlight setting
¡During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a See page 213
qAccess HELP mode H-40, and press the PRINT key.
HELP-040
Spec setting
1111
wUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
rPress the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -