Duplo DUPRINTER DP-440 - Page 259

261
c HELP Mode Function and Operation Procedures
chap.7
H-41
(1) Adjustment / specification settingHELP mode
ABCD Item Setting
0***
A/B size
1***
Inch size
*0**
Double feed detection setting
*1**
***0
Selection of sorter home
position return timing
To home position after complation
of last sheet
***1
To home position when next print
run starts
0000
Initial value
**0*
Count repeat display
Repeat display of count
**1*
No repeat display of count
OFF
ON
Paper size selection
setting
ePress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1)
Paper size selection,Double feed detection,Counter repeat,
Sorter return timing setting
¡Following items are indicated.
A : Paper size selection setting
B : Double feed detection setting
C : Counter repeat setting
D : Sorter return timing setting
(1) Paper size selection,Double feed detection,Counter repeat,
Sorter return timing setting
¡During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a See page 213
qAccess HELP mode H-41, and press the PRINT key.
HELP-041
Spec setting
1111
wUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
rPress the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -