Duplo DUPRINTER DP-440 - Page 260

262
c HELP Mode Function and Operation Procedures
chap.7
H-42
(1) Adjustment / specification settingHELP mode
ABCD
0000
0001
0010
0011
0100
0101
ABCD
0000
0001
0010
0011
0100
0101
Item
11
917
LG
LTR
STR
MAX
Item
A3
B4
A4R
B5R
A5R
POST
ePress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Default paper option setting
(1) Default paper option setting
¡During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a See page 213
qAccess HELP mode H-42, and press the PRINT key.
Display (when H-41 is set as follows)
¡A=0 : A/B size, A=1 : Inch size
HELP-042
Spec setting
1111
wUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
rPress the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -