Duplo DUPRINTER DP-440 - Page 277

279
c HELP Mode Function and Operation Procedures
chap.7
H-63
(1) Adjustment / specification settingHELP mode
ePress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) 2 sheets memory ( online ) setting
¡Following items are indicated.
A : 2 sheets memory (online) setting
B : (Not used)
C : (Not used)
D : (Not used)
(1) 2 sheets memory ( online ) setting
¡During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a See page 213
qAccess HELP mode H-63, and press the PRINT key.
HELP-063
Spec setting
1111
wUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
rPress the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
Display
0***
1***
*0**
*1**
**0*
**1*
***0
***1
0001
Item
( Not used )
( Not used )
( Not used )
2 sheets memory (online) setting
Setting
OFF
ON
Factory setting
Modes H-61 and H-62 are not used.