Duplo DUPRINTER DP-440 - Page 276

278
c HELP Mode Function and Operation Procedures
chap.7
H-60
(1) Adjustment / specification settingHELP mode
ePress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1)
Control panel auto clear - timer, Fine star mode timer
setting
¡Following items are indicated.
A ,B : Control panel auto clear - timer setting
C,D : Fine star mode - timer setting
(1) Control panel auto clear - timer, Fine star mode timer
setting
¡During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a See page 213
qAccess HELP mode H-60, and press the PRINT key.
HELP-060
Spec setting
1111
wUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
rPress the STOP key.
The HELP mode selection display will reappear.
- SAVE -
A B C D
Display Item Setting
0 0
**
Control panel auto clear -
timer setting
OFF
0 1
**
3 minutes
1 0
**
10 minutes
1 1
**
15 minutes
**
0 0
Fine star mode - timer setting
Deactivated
**
0 1 6 hours
**
1 0 12 hours
**
1 1 Auto
0 0 1 1
Factory setting