Duplo DUPRINTER DP-440 - Page 280

282
c HELP Mode Function and Operation Procedures
chap.7
H-67
(1) Adjustment / specification settingHELP mode
ABCD Item Setting
0***
OFF
1***
*0**
*1**
*10*
*11*
***0
A3/A4 drum display setting
***1
0000
Factory setting
Double feed detection
display setting
Tape cluster display setting
Long mode display setting
ON
OFF
ON
OFF
ON
OFF
ON
ePress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Double feed detection, Tape cluster,A3/A4 drum,
Long Mode display setting
¡Following items are indicated.
A : Double feed detection display setting
B : Tape cluster display setting
C : A3/A4 drum display setting
D : Long paper mode display setting
(1) Double feed detection, Tape cluster,A3/A4 drum,
Long Mode display setting
¡During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a See page 213
qAccess HELP mode H-67, and press the PRINT key.
HELP-067
Spec setting
1000
wUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
rPress the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -