DuraLabel PRO 300 - Page 20

18 | 3.2 Using a USB Cable DuraLabel.com | 800.788.5572
CONNECTING THE PRINTER
D. Select DuraLabel PRO or DuraLabel PRO 300 and click Next on the DuraLabel
Driver Selection window that appears.
E. Choose the install location and click Install on the Choose Install Location window
that appears. An Installing window shows installation progress.
F. Select Install printer drivers
*
on the Driver Wizard
window that appears and click Next.
*
NOTE: You will receive a notice if a previous driver is
found that should be removed. Please refer to Section
3.4, Upgrading a Driver, for instructions on uninstalling
a driver.
G. A Plug and Play Detection window appears.
Highlight Graphic Products DuraLabel PRO or
DuraLabel PRO 300 and click Next.
FIGURE 2 DuraLabel Driver Setup Wizard FIGURE 3 Windows Printer Driver
License Agreement
FIGURE 4 Selecting a DuraLabel Driver
FIGURE 5 Driver Install Location Window
FIGURE 6 Installing Window
FIGURE 7 Install Printer Driver Window
FIGURE 8 Install Driver for a Plug and
Play Printer