DURKOPP ADLER 745-35-10 A - Page 324

Troubleshooting
322 Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017
7201 Failure in CAN - Module corner
knife (AC001), power failure
• Check cable
• Check jumpers
• Check voltage supply
7202 Failure in CAN - Module corner
knife (AC001), excess
temperature at step motor output
stage
• Check cable
• Check jumpers
• Check voltage supply
• Check output stage
• Check motors
7209 Failure in CAN - Module corner
knife (AC001), wrong module
recognized at address
Check jumpers/DIP switch
7210 Failure in CAN - Module transport
unit (AC101), no module
recognized at address
• Check cable
• Check jumpers
• Check voltage supply
7211 Failure in CAN - Module transport
unit (AC101), power failure
• Check cable
• Check jumpers
• Check voltage supply
7215 Failure in CAN - Module transport
unit (AC101), outputs overload/
short circuit
Check output cable and output plug
7219 Failure in CAN - Module transport
unit (AC101), wrong module
recognized at address
Check jumpers/DIP switch
7260 General error CAN modules Check cable
Error code 8000-8999: Error messages displays
8400 Information No readable update-program for the control panel available.
The control panel program should be updated as soon as possible.
Continue with OK
8401 Information No valid program for the machine available. Should a new program be
transmitted?
8402 Information Machine has a program for another class. Should a new program be
transmitted?
8403 Information Machine has an outdated program. Should a new program be
transmitted?
8404 Information Update failed! Eventually the control panel program has to be reloaded.
Should the program be retransmitted nevertheless?
8406 Information Update failed! Please check the interface to the machine. Should a new
update be tried nevertheless?
8407 Information Update failed! Should the program be retransmitted?
8408 Information Waiting for RESET by machine.
8409 Information Switch off and on the machine again.
8410 Information Update failed! Should the program be retransmitted?
Error code Symbol Meaning Remedial action