HI Limit:
The highest value limitation of concentration. If the
concentration more than this value, “HI” will be displayed.
The value of concentration is between 0 to 9999.
LO Limit:
The lowest value limitation of concentration. If the
concentration less than this value, “LO” will be
displayed .The value of concentration is between 0 to 9999.
3.3.1.4 Print Setup
Press <4> to select Print Setup from the photometry submenu, a submenu list
appears on the right side of the screen as shown in the illustration below:
12/11/02 11:35 600.0 nm 0.854 ABS
Photometry
1 Parameter Setup 1 ESC/P
2 Sample Setup
3 Curve Setup
4 Print Setup
5 System Setup
6 Save Parameter
0 Forward
Select Function: _
Printer Type
1 ESC/P 2 DPU 3 PCL3
Press the number key on the keyboard to select corresponding function.
DB-20 support three types printer, namely EPSON series printer, HP type series
printer and Seiko thermal printer.
3.3.1.5 System Setup
Press <5> to select System Setup from the photometry submenu, a submenu list
appears on the right side of the screen as shown in the illustration below:
3-10
To Next Page
Loading...
