If the Repeat Num is more than one, all the measurement value will be displayed
fter measuring of standard sample, insert the unknown sample and then press
s
Note: The “+” marks indicating the measured points are suppressed in
presentation of a saved calibration curve.
in the screen. For example, the Repeat Num is 2, the following screen will
appear on the LCD.
600.0 nm 0.854 ABS
Photometry
0.410
STD ABS Conc
1-1 -0.068
1-2 -0.068
1 -0.068 0.000 ABS
2-1 0.098
2-2 0.100 0.050
2 0.099 -0.068
0.000 MG/L 0.200
Conc = f(ABS) K0 = 0.000 K1 = 0.577 R= 1.000 R2 = 1.000
Select Function: _
1 Measure 2 Save Inside 3 Save to USB 4 Graph 5 Blank 6 Statistic
A
<1> key on the keypad to measure the unknown sample. Press <2> to save the
measurement results. The instrument can save 10 files (1 –10) at most. If you
want to save the file in the flash memory, press <3> key on the keyboard. Pres
<4> key on the keyboard to adjust the coordinate of calibration curve. The
display screen is shown as follow after pressing <4> key.
3-15
To Next Page
Loading...
