11/11/02 10:41 600.0 nm 0.854 ABS
Time Scan
1.000
ABS
0.000
06
Select Function:_
0s
1 Peak 2 Valley 3 All Data 4 Kinetics
Press <1> and the screen will change the peak data screen as shown below.
Similarly, press <2> and the Valley data will be listed on the screen. If you press
<3> key and all data will be listed on the screen.
11/10/02 17:36 600.0 nm 0.85 ABS
Peak
ID Time(s) ABS ID Time(s) ABS ID ABS
No Peaks
Selection Function :_
Time(s)
Press <4> key to select Kinetics. Then, you can input the start time and end time.
The screen will change to Kinetics screen as shown below.
3-41
To Next Page
Loading...
