COM Radio Operation
SkyView Classic Pilot’s User Guide – Revision Z
11-1
11. COM Radio Operation
The SV-COM-C25 and SV-COM-X83 integrate with your SkyView system in a novel way, allowing
you to “load” airports to it to enable quick, single button-push frequency tuning via the
dedicated TWR, ATIS, GND, and ATC buttons. You can also send individual frequencies to your
SkyView COM radio from SkyView’s airport info pages. And of course, you can also spin
frequencies in the “old fashioned way” when you’re feeling nostalgic (or are following ATC
instructions).
The airport lookup, loading and reverse lookup features of the SV-COM-C25 and SV-
COM-X83 require a connected SkyView with a GPS signal, SkyView’s Navigation
Mapping Software, and an aviation database.
COM Control Panel Overview
The SV-COM-C25 and SV-COM-X83 have a dedicated control panel that contains full status
information about the radio:
Figure 227 - COM Radio Control Panel
To Next Page
Loading...
