79
79
79
79
View in parameter assignment mode (example):
4
4
4
4 .4.10
.4.10
.4.10
.4.10 Multiple
Multiple
Multiple
Multiple function
function
function
function switch
switch
switch
switch
Short
Short
Short
Short description
description
description
description
Switch with two different functions:
• Pulse switch with off delay
• Switch (continuous light)
Parameter
Parameter
Parameter
Parameter
The off-delay time T, the permanent light time TL, the on-delay prewarning time T!, and the
prewarning time period T!L can be provided by the actual value of another
already-programmed function:
Analog comparator: Ax – Ay
Analog trigger: Ax
Analog amplifier: Ax
Analog multiplexer: AQ
Connection
Connection
Connection
Connection Description
Description
Description
Description
Input Trg
Trg
Trg
Trg With a signal at input Trg (Trigger) you set output Q
(continuous light), or reset Q with off delay. Output Q can
be reset with a signal at the Trg input.
Input R
R
R
R You set the current time Ta, and reset the output to 0, with
a signal at input R.
Parameter T:
T:
T:
T: The output is reset (1 to 0 transition) when the time T
has expired.
T
T
T
T
L
L
L
L
determines the period during which the input must be
set in order to enable the permanent light function.
T
T
T
T
!
!
!
!
Determines the on delay for the pre - warning time.
T
T
T
T
!L
!L
!L
!L
determines the length of the pre - warning time.
Retentivity
Retentivity
Retentivity
Retentivity set (on) = the status is retentive in memory.
Output Q
Q
Q
Q Output Q is set with a signal at input Trg, and it is reset
again after a configured time has expired and depending
on the pulse width at input Trg, or it is reset with another
signal at input Trg.