Eaton 9390 - Page 144

129 Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F
TTaabbllee 77.. NNoottiicceess ((CCoonnttiinnuueedd))
MMeessssaaggee
HHoorrnn PPhhoonnee
RReellaayy LLoogg**
IInnddiiccaattiioonn
Inv Under or Over Frequency OK Off No No HA Condition Cleared
Inverter AC Over Voltage
1
No No HA Information Only
Inverter AC Over Voltage OK Off No No HA Condition Cleared
Inverter AC Under Voltage
1
No No HA Information Only
Inverter AC Under Voltage OK Off No No HA Condition Cleared
Inverter Off Command
1
No No A Information Only
Inverter On Command
1
No No HA
Information Only
Inverter Output Overcurrent
1
No No HA Information Only
Inverter Phase Rotation
1
No No HA Information Only
Inverter Phase Rotation OK Off
No No HA
Condition Cleared
Load Dumped (Load Power Off)
1 1
No HA Investigate UPS
Load Dumped (Load Power Off) OK Off No No HA Condition Cleared
Load Off Command Executed
1
No No HA Information Only
Load Power On Command
1
No No HA Information Only
Load Power On Command Received
1
No No HA Information Only
Loss of Redundancy
1
No No HA Information Only
Loss of Redundancy OK Off No No HA Condition Cleared
Maintenance Bypass Mode
1
No No HA Information Only
Modem Call Completion Failed
1
No No HA Information Only
Neutral Current Limit
1
No No HA Information Only
Neutral Current Limit OK Off No No HA Condition Cleared
Non-Volatile Memory Failure
1
No No A Information Only
Non-Volatile Memory Failure OK Off No No A Condition Cleared
Output AC Over Voltage
1
No No HA Information Only
Output AC Over Voltage OK Off No No HA Condition Cleared
Output AC Under Voltage
1
No No HA Information Only
Output AC Under Voltage OK Off No No HA Condition Cleared
Output Under or Over Frequency
1
No No HA Information Only
Output Under or Over Frequency OK Off
No No HA
Condition Cleared
Rectifier Current Over 125%
1
No No A Information Only
Rectifier Input Over Current
1
No No A Information Only
Responding to System Events
For Internal Use Only