Eaton 9390 - Page 145

Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F 130
TTaabbllee 77.. NNoottiicceess ((CCoonnttiinnuueedd))
MMeessssaaggee
HHoorrnn PPhhoonnee
RReellaayy LLoogg**
IInnddiiccaattiioonn
UPS Module Off
1
No No A Information Only
UPS Module Off OK Off No No A Condition Cleared
UPS on Battery
1
No No A
Investigate UPS
UPS on Battery OK Off
No No A
Condition Cleared
UPS on Bypass
1
No No A Investigate UPS
UPS on Bypass OK Off No No A Condition Cleared
UPS on Generator
1
No No A Information Only
UPS on Generator OK Off
No No A
Condition Cleared
*Log codes indicate where the UPS records the event: H = History log; HA = History and Active logs; and A = Active log only.
TTaabbllee 88.. SSttaattuuss
MMeessssaaggee
HHoorrnn PPhhoonnee
RReellaayy LLoogg**
IInnddiiccaattiioonn
Battery Switchgear Closed No No No H User Status
Battery Switchgear Open No No No H User Status
Bypass Switchgear Closed No No No H User Status
Bypass Switchgear Open No No No H User Status
Charger Status Off No No No H User Status
Charger Status On
No No No H
User Status
Check Heatsink Temp Sensor
No No No No
Service Status
Check Heatsink Temp Sensor OK No No No No User Status
Control Power Status Off No No No No User Status
Control Power Status On
No No No No
User Status
Heatsink Overtemperature No No No No Service Status
Heatsink Overtemperature OK No No No No User Status
Incoming Modem Call Started
No No No H
User Status
Inverter Status Off
No No No No
User Status
Inverter Status On No No No No User Status
Modem Call Completed Successfully No No No H User Status
Modem Connection Established
No No No H
User Status
Outgoing Modem Call Started No No No H User Status
Output Switchgear Open No No No H User Status
Output Switchgear Open OK No No No H User Status
Responding to System Events
For Internal Use Only