Eaton 93PM - 9 Technical Data; Directives and Standards

9 Technical data
For a complete technical specification, contact your Eaton representative. Due
to continuous product improvement programs, specifications are subject to
change without notice.
9.1 Directives and standards
Safety
IEC 62040-1: Uninterruptible power systems (UPS) - Part
1: General and safety requirements for UPS
IEC 60950-1: Information technology equipment - Safety -
Part 1: General requirements
EMC, emissions
IEC 62040-2: Uninterruptible power systems (UPS) - Part
2: Electromagnetic compatibility (EMC) requirements / Ed.
2
EMC, immunity
IEC 61000-2: Electromagnetic compatibility (EMC),
IEC 61000-2-2 (Low-frequency conducted),
IEC 61000-4-2 (ESD),
IEC 61000-4-3 (RF electromagnetic field),
IEC 61000-4-4 (Fast transient-burst),
IEC 61000-4-5 (Surge),
IEC 61000-4-6 (Conducted RF common mode),
IEC 61000-4-8 (Power frequency magnetic field)
Performance & tests
IEC 62040-3: Uninterruptible power systems (UPS) - Part
3: Method of specifying the performance and test require-
ments
Environmental
IEC62040-4: Uninterruptible Power Systems (UPS) - Part
4: Environmental Aspects - Requirements and Reporting
IEC 62430: Environmentally conscious design for electrical
and electronic products
RoHS 2011/65/EU on the restriction of the use of certain hazard-
ous substances in electrical and electronic equipment
WEEE 2012/19/EU on waste electrical and electronic equipment
(WEEE)
ECO Design Directive 2009/125/EC establishing a framework for the setting of
ecodesign requirements for energyrelated products
Batteries 2006/66/EC on batteries and accumulators and waste bat-
teries and accumulators
Packaging 94/62/EC on packaging and packaging waste
Eaton 93PM UPS 30–200 kVA User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 111 (126)