Eaton 93PM - Eaton Corporation Plc 2017. All Rights Reserved

Name ID
Command Received 294
Configuration Error 53
CSB Control Power 425
CSB EEPROM Version Downgrade 464
CSB Software Incompatible 426
DC Link Over Voltage 10
DC Link Under Voltage 11
Disable ABM Command 447
Disable ESS Command 444
Disable HRS Command 456
Disable Service Mode Command 441
Disable VMMS Command 446
Distributed Parallel System 276
ECT Command (UPM) 86
ECT Command 257
Emergency Transfer to Bypass 241
Enable ABM Command 448
Enable Auto Calibration Command 462
Enable ESS Command 444
Enable High Alert Command 459
Enable HRS Command 457
Enable Service Mode Command 440
Enable VMMS Command 446
ESS Active 213
ESS Enabled 226
ESS Installed 225
ESS Inverter Gapping 5
ESS Not Available 307
Exit ECT Mode Abnormally 80
Exit ESS Mode 205
External CAN Abnormal or Configuration Mismatch 265
External communications failure 463
Fan Failed 48
Fan Power Board Cool Fan Failed 305
Frequency Auto Detected 309
Fuse Failed 47
Ground Wiring Fault 264
High Alert 308
Eaton 93PM UPS 30–200 kVA User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 119 (126)