Eaton 93PM - Eaton Corporation Plc 2017. All Rights Reserved

Name ID
MCU Control Power 289
MCU EEPROM Checksum Failed 240
MCU Software Incompatible 210
MIS Installed 291
MIS Open/Closed 292
MOB Open 279
Not Enough Bypass Capacity 272
Not Enough Redundant UPMs 323
Not Enough UPMs 271
On Alarm LED Is Lit 416
On Battery LED Is Lit 260
On Bypass LED Is Lit 261
On MBS, Battery 216
On MBS, ESS Active 298
On MBS, HRS Active 300
On MBS, On Bypass 218
On MBS, Starting 296
On MBS, Shutdown 219
On MBS, Unit Online 217
On MBS, VMMS Active 299
On Notice LED Is Lit 417
On Line LED Is Lit 262
Online command 384
Output AC Over Voltage 99
Output AC Over Voltage 196
Output AC Under Voltage 100
Output AC Under Voltage 195
Output Hot 236
Output Not In Sync With Bypass 286
Output Not In Sync with Ext Sync 287
Output Overload Trip 302
Output Phase Rotation 199
Output Sync Out of Range 267
Output Under/ Over Frequency 197
Output Voltage Abnormal 198
Parallel Meters CAN Bus Failed 415
Parallel Setup Failure 258
Parameter Match Failed 316
Eaton 93PM UPS 30–200 kVA User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 121 (126)