CAUTION
Keep the surroundings of the UPS uncluttered, clean, and free from excess
moisture.
Obey all DANGER, CAUTION, and WARNING notices on the equipment.
2.1 Audience
This document is intended for:
• People who plan and perform the installation of the UPS
• People who use the UPS
This document provides guidelines for how to examine the UPS delivery and
how install and operate the UPS.
The reader is expected to know the fundamentals of electricity, wiring, electrical
components and electrical schematic symbols. This document is written for a
global reader.
CAUTION
Read this document before you start to operate or perform work on the UPS.
2.2 CE marking
The product has a CE marking in compliance with the following European
directives:
• LV Directive (Safety) 2014/35/EU
• EMC Directive 2014/30/EU
Declarations of conformity with UPS harmonized standards and directives EN
62040-1 (Safety) and EN 62040-2 (EMC) are available at
www.eaton.eu
or by
contacting your nearest Eaton office or authorized partner.
2.3 User precautions
The only permitted user operations.
• Startup and shutdown of the UPS, excluding the commissioning startup.
• Use of the LCD control panel and the Maintenance Bypass Switch (MBS).
• Use of optional connectivity modules and their software.
Obey the precautions and only perform the described operations. Any deviation
from the instructions can be dangerous to the user or cause accidental load
loss.
Eaton 93PM UPS 30–200 kVA
User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 12 (126)
To Next Page
Loading...
