Eaton 93PM - Eaton Corporation Plc 2017. All Rights Reserved

Name ID
Signal Input 6 On 412
Signal Input 7 On 413
Signal Input 8 On 451
Signal Input 9 On 452
Signal Input Battery Disconnected 402
Signal Input Bypass Sync Disabled 400
Signal Input Charger Off 392
Signal Input Disable Battery Charge and Discharge 401
Signal Input Forced Maintenance Bypass 404
Signal Input Maintenance Bypass 403
Signal Input MIS Open 406
Signal Input MOB Open 405
Signal Input On Generator 397
Signal Input Remote ESS Command 395
Signal Input Remote Go to Bypass 389
Signal Input Remote Load Off 390
Signal Input Remote Power Module Off 391
Signal Input Remote Rectifier Off 398
Signal Input Remote Sync 399
Signal Input Remote UPS On 388
Signal Input Remote VMMS Command 394
Signal Input Remote VMMS/ESS Off 393
Signal Input Reset Alarms 396
Signal Input Transformer Over Temperature 465
Signal Input 331
Single UPS System 274
Site Wiring Fault 49
Site Wiring Fault 284
SPI Bus Failed 77
SPI Bus Failed 266
Start Boost Charge Command 470
Start ECT Command 454
Static Switch Active 280
Static Switch On 430
Static Switch Short 224
Stop Boost Charge Command 471
Stop ECT Command 455
STS Ambient Over Temperature 301
Eaton 93PM UPS 30–200 kVA User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 123 (126)