Figure 30. External parallel connector
Figure 31. Simplified CAN and Pull-Chain wiring for parallel UPS system
A UPS 1 1 CAN
B UPS 2 2 Pull chain
C UPS 3 (if installed)
D UPS 4 (if installed)
Note: This drawing is for distributed bypass wiring purposes and it is not a
floor layout plan. UPSs can be placed in any physical order.
Eaton 93PM UPS 30–200 kVA User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 77 (126)
To Next Page
Loading...
