Provides remote monitoring through a web browser interface, e-mail, and a
network management system (NMS) using SNMP and connects to a twisted-
pair Ethernet (10/100BaseT) network.
Figure 35. Network Card - MS
• PX Gateway Card
Provides remote monitoring through a Web browser interface, e-mail, and a
network management system (NMS) using SNMP and connects to a twisted-
pair Ethernet (10/100BaseT) network. The card also provides direct
integration of UPS information (meters and status) to a Building
Management System (BMS) using the Modbus RTU and TCP protocols as
well as BACnet protocols.
Figure 36. PX Gateway Card
• Industrial Relay Card-MS
The MiniSlot Industrial Relay Card provides a way of connecting the UPS to
industrial and electrical monitoring systems. It also enables a wide range of
control applications by allowing up to 250 volts and 5 Amperes through its 5
relay connections. By connecting wires to the corresponding places in its
terminal blocks, you can choose Normally Open or Normally Closed setup
for each output.
For information on how to configure Industrial Relay Card-MS, see Section
6.5
.
Eaton 93PM UPS 30–200 kVA
User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 81 (126)
To Next Page
Loading...
