Eaton 93PM - Page 94

Main menu Submenu Functions
Mimics UPS mimics An overview of the UPS operation, including informa-
tion on load, efficiency and consumption. If there is
an error, an error indicator is displayed next to the af-
fected part. Active events log can be opened by tap-
ping the error indicator.
UPS module
map
Module map shows the status of each UPM.
System over-
view
System overview shows the status and meters sum-
mary for each UPS.
ESS The ESS mimic screen shows the approximated con-
sumption and energy savings of the ESS mode.
Logs Active events All active events are displayed.
System log A log of all system events.
Service log A detailed log of UPS operations.
Change log A log of all changed settings and their values.
Statistics:
UPS, Battery
Statistics sum-
mary
A summary of UPS statistics
Statistics details Details are available by pressing on different statis-
tics.
Settings User Configura-
tion Service
Configurable user settings. For details, see Section
7.1.4.1 .
7.1.4.1 User settings
The UPS has the following settings that are user-modifiable. In the Home
screen, select Settings.
Table 20: User settings
Setting Description
Information Information on the UPS model, including part number and serial
number.
About Version information.
To modify the Configuration settings, you need to sign in.
Table 21: Configuration settings
Setting Description
Language Change the user interface language.
Unit Name Change the unit name.
Clock Change the date and time, change the clock format or enable/
disable NTP clock setup.
GSM GSM modem.
Call Service Send automatic e-mail to the service center in case of a failure.
Eaton 93PM UPS 30–200 kVA User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 94 (126)