160
Gear Shift Lever Housing Disassembly
5
Gear Shift Lever Housing 2nd Ed. 02/07 FSO-2405
FSO-2405/133
FSO-2405/131
FSO-2405/132
6
7
10
8
9
6. Use a pin punch and remove the two spade
pins from the housing tower bores by punching
the pins from inside outwards.
7. Remove the lower bushing.
8. Remove the wave washer.
9. Remove the thrust washer.
10. Turn the housing over and remove the oil baffle
from the housing using a screwdriver.
NOTE: Discard and replace the oil baffle.
To Next Page
Loading...