Appendix
04/10 MN04020001Z-EN
188
Logic function
P13.1
1453 - rw LOG function, Selection
input A
0 = Deactivated
1 = READY, ready for operation
2 = RUN, enable (FWD, REV)
3 = FAULT, error message
4 = Error message (inverted)
5 = ALARM, warning
6 = REV, anticlockwise rotating field
7 = Output frequency = frequency
setpoint
8 = Motor controller active
9 = Zero frequency
10 = Frequency monitoring 1
11 = Frequency monitoring 2
12 = PID control
13 = Overtemperature message
14 = Overcurrent control active
15 = Overvoltage control active
16 = PLC Sequence control active
17 = PLC Sequence control, single step
completed
18 = PLC Sequence control, program
cycle completed
19 = PLC Sequence control, pause
20 = Counter, value 1 reached
21 = Counter, value 2 reached
22 = RUN message active
23 = Setpoint error (live-zero)
24 = LOG function fulfilled
25 = PID controller, actual value
monitoring
26 = External brake actuated
27 = Current monitoring
28 = Fieldbus, remote output
122 0
P13.2 1454 - rw LOG function, Selection
input B
Like P13.1 123 0
P13.3
1455 - rw LOG function, select
operation
0=AANDB
1=AORB
2=AXORB
123 0
PNU ID Access right Designation Value range Page FS
(P1.3)
User
setting
RUN ro/rw
To Next Page
Loading...
Need help?
General