Eaton PDI WaveStar BCMS - 3.2.2 Customer Communications Connections

Eaton PDI WaveStar BCMS Hub Installation and Operation Manual P-164001108—Rev 01 11
Figure 6. Customer Connections, Power and Communications, Left Inside Panel
33..22..22 CCuussttoommeerr CCoommmmuunniiccaattiioonnss CCoonnnneeccttiioonnss
Modbus RTU protocol can be used upstream to the BMS or DCIM system as the single upstream link or with a
TCP/IP upstream link.
Modbus RTU protocol is used downstream from the BCMS in a single daisy chain to all devices.
Installation