Eaton PDI WaveStar BCMS Hub Installation and Operation Manual P-164001108—Rev 01 33
Figure 24. End Feed Additional Device Screens
55..55..22 TTaapp--OOffff BBooxx
A Bus System Tap-Off Box has two (2) device screens (Figure 25). Point values on the screens correspond to
point values in the Tap-Off Box iBus points list.
Commonly used operations are available as screen controls.
If a control is not present for a desired operation, you can use the Manual control to set the register value for a
point.
Operation: Device Information
To Next Page
Loading...
