www.eaton.com IM02601001E 8-3
Introduction to Web Server Pages
top center of the page provides options for selecting available graphs. For example, in
the Meter page you can select from the following types of graphs:
Trend and Min/Max•
Waveform • (available in the 2270 model only)
Indvidual Harmonics • (available in the 2270 model only)
Phasors • (not a selection item if wiring conguration is set to Delta)
Note that trend data must be available for that time period in order to view the single-
cycle Waveform graph of harmonic distortion. If the required data isn’t available for the
selected time period, you’ll see an error message.
The Trend graph is a “snapshot” of the current values plus the historical values in the
designated range (zoom). It doesn’t update automatically and you must therefore re-
select the information to update the the display.
You can pan or zoom through a graph by clicking one of the options below the graph. Use
the pan feature to move forward or backward through the available time range. The zoom
feature (plus, minus, and drop-down menu) provides the following time ranges:
1 - 16 hours
•
2 - Two days•
3 - Eight days•
4 - Four-and-a-Half Weeks (Demand Prole and Demand Comparison) •
A table containing all of the plotted data points is beneath the plot. You can scroll through
this to view individual data points.
The Meter Page
To Next Page
Loading...
