www.eaton.com IM02601001E B-1
DIP Switch Description
DIP SWITCH DESCRIPTIONB
The DIP Switch denitions for the Gateway Card are listed in the following table.
S1 Position Number OFF Position (Default) ON Position
1
Enable previously stored network
configuration settings (Normal
mode).
Override network settings to as-
sign a private IP address (Con-
figuration mode); the port is set
to 192.168.1.1.
2
Reserved Reserved
3
Normal behavior Reset the HTTP passwords to the
defaults on boot up (user and
admin). After a successful boot,
the switch should be turned back
off before rebooting the card.
4
Reserved Reserved
5
Reserved Reserved
6
Normal behavior Reset the card to factory defaults
on boot up. After a successful
boot, the switch should be turned
back off before rebooting the
card.
7
Reserved Reserved
8
Reserved Reserved