10-20 IM02601001E www.eaton.com
Setup on the Web Server Pages
Firmware Configuration Page
Diagnostics
You can access the system log or a page that displays the names, serial numbers, and
versions of the various components in the meter.
The system log shows system events, such as changes to settings, rmware updates,
and meter restarts. Each event carries a time-and-date stamp and a severity level. You
can print the log by clicking the Print button; however, the printout contains a screen im-
age, not the entire log. To print an entire log you may need to use the scroll bar to reposi-
tion the log in the window and print it in sections.
You can tell who has made conguration changes to the meter from the log as it
not only logs changes but the IP address of the computer from which the changes were
made.
System Log Page
To Next Page
Loading...
