www.eaton.com IM02601001E 9-5
Functions on the Web Server Pages
and make a selection. Phasor is not available if wiring conguration is set to Delta
When Trend and Min/Max is selected, the minimum, maximum, and average values are
displayed on the bottom right side of the page with date and time stamps.
By default, all the options are selected when the Phasor diagram is selected. The user
can unselect an option on the left side of the page to remove the correlating point of the
phasor diagram.
Harmonics aren’t available for frequency.
Meter Page: Frequency Display
Power
The Power page contains information about the present power consumption and power
factor. The meter calculates the following :
Apparent Power Factor (PF) for System, Phase A, Phase B, and Phase C•
Apparent Power (kVA) for System, Phase A, Phase B and Phase C•
Real Power (kW) for System, Phase A, Phase B and Phase C•
Reactive Power (kvar) for System, Phase A, Phase B and Phase C•
The meter will log the trend for all of the above measurements, as well as detect and
save Minimum and Maximum values with date and time stamps for all of the above
parameters.
To Next Page
Loading...
