2-6 IM02601001E www.eaton.com
2-7 IM02601001E www.eaton.com
Overview and Specications
Isolation
All Inputs and Outputs are galvanically isolated to 2500 Vac
Environmental Rating
Storage: (-20 to +70)
0
C
Operating: (-20 to +70)
0
C
Humidity: to 95% RH Non-condensing
Faceplate Rating: NEMA12 (Water Resistant), Mounting Gasket Included
Measurement Methods
Voltage, Current: True RMS
Power: Sampling at over 400 Samples per Cycle on All Channels
Update Rate
Watts, VAR and VA: Every 6 cycles (e.g., 100 ms @ 60 Hz)
All other parameters: Every 60 cycles (e.g., 1 s @ 60 Hz)
1 second for current only measurement, if reference
voltage is not available
Communication
Serial Communications Format:
1. RS485 Port through Back Plate
2. Energy Pulse Output through Back Plate
Protocols: Modbus RTU, Modbus ASCII, DNP 3.0
Com Port Baud Rate: 9,600 to 57,600 bps
Com Port Address: 001-247
Data Format: 8 Bit, No Parity
PXM 2000 Series
Transducer Default Initial Communication Baud 9600 (See Chapter 5)
Network Communications Format:
Connection Type: RJ45, 10/100BaseT Ethernet Network Port
Protocols: Ethernet TCP/IP, Modbus TCP, HTTP, HTTPS, NTP, SMTP,
SNMP
Mechanical Parameters
Dimensions: see Chapter 3.
Weight: 2 pounds/ 0.9kg (ships in a 6”/152.4mm cube container)
(Without Option Card)
To Next Page
Loading...
