User manual SEFELEC 5x Series 68 v1.06
SAVE UNDER A FILE NAME THE MEASUREMENT SETTINGS
All the settings of the insulation resistance measurement can be saved under a file name allow-
ing the setting to be found easily.
After you have set all the settings, they are located under the file name specified in the field be-
low:
To change the name of the file press the field with the name of the file to show a virtual keyboard
and enter the new name.
Spaces are not allowed in the file name, use the dash (-) or the underscore (_) as a separator.
Special characters such as @, €, £, $, &, µ, (), {}, etc. are not allowed in the file names. The file
name can contain at least 50 characters.
When validating the machine proposes to keep the old file and to duplicate or rename it without
keeping the original version.
To Next Page
Loading...