AS9216 Installation and
Maintenance Manual
Before You Start/Safety Guidelines
492006-2306-013-A00 ECI Telecom Ltd. Proprietary 1-3
WARNING: Install this equipment only in a Restricted
Access Location per UL 60950-1 clause 1.2.7.3.
LASER WARNING: The equipment is designed to be used
with Class 1 Laser fiber optic transmitters which may
endanger your eyes.
Do not look directly into the fiber optic cables or
transmitter.
LASER WARNING: The device is provided with SFP
sockets in which fiber optic transceivers may be installed.
In order to meet the safety requirement of Class 1 fiber
optic laser emission, use only fiber optic transceivers
which comply with IEC 60825-1 or IEC 60825-2 and FDA
21 CFR 1040.10 and CFR 1040.1.
CAUTION: This equipment contains Electrostatic
Discharge (ESD) sensitive components. Use ESD
protection before servicing or installing components of this
system.
CAUTION: Changes or modifications made to this device
that are not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
CAUTION: Remove the power cord from a power-supply
unit before you install it or remove it from the device.
Otherwise, as a result, the power supply or the device
could be damaged. (The device can be running while a
power supply is being installed or removed, but the power
supply itself should not be connected to a power source.)
To Next Page
Loading...
General