INSTRUCTIONS MANUAL
-29-
ERROR CODES
-The air gas readings were unstable
- The air gas readings were excessively high
- The air calibration resulted in a low output
- The unit is beyond the operating temperature range
- The refrigerant sampled has an excessively large amount of air or there was little or
no sample flow due to plugged sample line gas analyzer filter
- System leaks
- Presence of refrigerant into the a/c system
- Low vacuum
- Empty tracer container
- Empty oil container
- Low gas availability
- Vacuum leaks (a/c system flushing)
- Pressure leaks (a/c system flushing)
- Sistem empty
- N2 test not completed
- N2 pressure insufficient
- N2 test leaks
- Comunication error
- Low oil volume
- Check connections
- Empty external bottle
- High pressure alarm
To Next Page
Loading...
