INSTRUCTIONS MANUAL
-7-
CONDITIONS OF WARRANTY
Refer to CONDITIONS OF WARRANTY booklet supplied with the machine.
UNPACKING INSTRUCTIONS
1. Observe the adhesive labels the incline and the accessory kit
2. Cut the straps
3. Pull out the accessory box
4. Open the upper part of the box
5. Remove the internal package
6. Raise the box
7. Pull out the machine cover
8. Open the rear door to the bottom
9. Tilt and remove sponge protection on the back (tilt - remove)
10.ilt and remove the machine from rear using ramp
NOTE: keep the original packaging and re-use it for further transportation
NOTE: use the handle (ref.7, Fig.12) to move the machine.
To Next Page
Loading...
