Ecotechnics ECK FLAG - N2 TEST SETTINGS; OIL SETTING AND TYPES

INSTRUCTIONS MANUAL
-66-
N2 TEST SETTINGS
From the SETUP, select N2 TEST SETTINGS, default setting is displayed:
Each value can be modified, within the values shown in parentheses.
NOTE: press INFO to restore default values:
 Waiting time 2 min
 Leaks threshold 500mbar
OIL SETTING
From the SETUP MENU, select OIL SETTING:
Select OIL TYPE.
NOTE: this operation is to use different containers, for example, if instead of a PAG you want to
use a HYBRID OIL: select PAG CONTAINER
PAG
DEFAULT
SETUP / VACUUM SETTING
1 2
3
4
5
6
7
8
9
0
.
<
WAITING TIME FOR N2 TEST min
(min 1 – 30 max)
LEAKS THRESHOLDS min
(min 0.10 – 1.00 max)
Press to set default values
0.50
5
DD/MM/YY XX:XX PM
PAGH
DD/MM/YY XX:XX PM
SETUP / OIL SETTING
PAG
PAG2 PAG1
HR
HD
DD/MM/YY XX:XX PM
SETUP / OIL SETTING
PAG
PAG1 HD
POE H HR
UV H HD
POE UV