INSTRUCTIONS MANUAL
-38-
When completed, the system will go on to charging with the preset quantity of refrigerant.
Then the following screen will be displayed:
Unscrew HP and LP coupling without disconnect from A/C system end press to continue:
The machine will recover the residual refrigerant into the service hoses, then the following
screen will be displayed:
UV injection
DD/MM/YY XX:XX PM
AUTOMATIC / OIL-UV INJECTION
Oil injected
0 ml / 0 ml
UV injected
0 ml / 0 ml
Close HP and LP couplings without disconnected
from A/C system and press to continue
DD/MM/YY XX:XX PM
AUTOMATIC / CHARGE
Empty hoses
DD/MM/YY XX:XX PM
AUTOMATIC / EMPTY HOSES
Hoses pressure
4.01 bar
Close and disconnect HP and LP couplings
from A/C system
DD/MM/YY XX:XX PM
AUTOMATIC / EMPTY HOSES
Refrigerant recovered
0 g
Oil recovered
0 ml
Vacuum time
2 min
Refrigerant charged
100 g
Oil injected
90 ml
UV injected
315 ml
Charge
DD/MM/YY XX:XX PM
AUTOMATIC / CHARGE
Refrigerant charged
200/500 g
Tank pressure
7 bar
A/C pressure
4.85 bar
Tank temperature
22 °C
To Next Page
Loading...
