Ecotechnics ECK FLAG - VACUUM PUMP MAINTENANCE; VACUUM PUMP OIL PROCEDURES; M.1) OIL TOP-UP PROCEDURE

INSTRUCTIONS MANUAL
-89-
3
MAX
MIN
FIG.
18
TOOLS:
 Funn
el
 Disp
osal
conta
iner
 Allen
wren
ch n°
5; 8.
5
1
The oil must be added through the hole in which the oil cap was lodged by using a proper
funnel (ref 5, Fig.18).
Add oil a little at a time, waiting for the level to rise before each successive addition, until the oil
level is about ½ cm above the red mark on the indicator (ref 3, Fig.18).
Replace the filling cap (ref 1, Fig.18) and tighten down.