Index
Shipment contents, 3-1
Source mode, 5-1
Selecting, 4-10
Specifications, 2-1
Specifications, 2-1
General, 2-2
Meter mode, 2-2
Source mode, 2-1
Thermocouple accuracy, 2-3
Standby, 4-1, 4-6, 4-21
Starting a sequence, 4-14
Step time, sequence, 4-15
Stepping, sequence, 4-15
Storage, temperature range, 2-3
System errors, 4-7
System temperature units, setting, 4-10
System voltage units, setting, 4-10
T
TC connector, applications, 5-2
Temperature
Output, selecting, 4-10
Reference-junction, see Reference-junction
temperature.
Resolution limit, setting, 4-10
Scale, setting, 4-11
Units, setting, 4-10
Variation, ambient, 5-3
Terminals
Alignment, 10-3
Choosing, 5-2
Corrections, 10-3
Guard, shielding, 5-3
Setting, 4-11
Test report, A-1
Theory of operation, 7-1
Thermocouple meter, alloy input, 7-2
Thermocouple meter, copper input, 7-2
Thermocouple simulator, alloy output, 7-1
Thermocouple simulator, copper output,
7-2
Voltage source, alloy output, 7-3
Voltage source, copper output, 7-2
Voltmeter, alloy input, 7-3
Voltmeter, copper input, 7-2
Thermocouple
Accuracy specifications, 2-3
Calibration procedure, B-1
Connector, 4-11, 5-2
Corrections, 10-3
Menu, 4-8
Meter (alloy input), theory, 7-2
Meter (copper input), theory, 7-2
Offset, 4-4, 4-9
Simulator (alloy output), theory, 7-1
Simulator (copper output), theory, 7-2
Type, setting, 4-9
Types available, 4-4
Wires, polarity, 5-3
Time, setting, 4-21
Timed sequence stepping, 4-15
Top cover
Installation, 9-3
Removal, 9-2
Troubleshooting, 8-1
A/D ERRORS message, 8-3
Ac power, 8-1
Alignment, 8-4
Analog assembly, 8-3
Dc power, 8-1
Diagnostic messages, 8-3
Digital assembly, 8-3
Display, 8-3
Encoder, 8-3
Front panel, 8-2
Internal clock, 8-3
Keys, 8-3
Operating screen, 8-2
Output or meter reading wanders over
time, 8-4
Power, 8-1
U
Unpacking, 3-1
V
Viewing logged data, 4-17
Viewing logged instrument setup, 4-17
Viewing/starting a sequence, 4-14
Index 5
To Next Page
Loading...