EDAN C6A - Computer Requirements; Monitor Requirements; Printer Requirements

C3A, C6A, C6A HDVideoColposcope User Manual Introduction
- 9 -
2.1.1 Computer Requirements
The video colposcope software should be installed in a computer that meets the following
specifications.
C3A, C6A:
CPU
Dual-core, ≥2.1GHz
Memory
≥2GB
Hard disk
≥500GB
Resolution
Over1366*768
C6A HD:
CPU
Dual-core, ≥2.3 GHz
Memory
≥4 GB
Hard disk
≥500GB
Resolution
Over 1920*1080
2.1.2 Monitor Requirements
C3A, C6A:
Interface
S-video
Resolution
≥1024*768
C6A HD:
Interface
HDMI/DVI
Resolution
≥1920*1080
WARNING
1. The computer or monitor shall comply with the requirements of the valid version of
IEC/EN 60950 and have relevant certification (such as the CE certification).
2. When connecting the computer or monitorto the device, ensure that the formed
system meets the requirements of the valid version of IEC/EN 60601-1.
2.1.3 Printer Requirements
A color inkjet printer or laser printer above 600 dpi should be used.