C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 81 -
5.12.2.6 Customizing the Database Header
The header of the case list on the Database interface can be customized.
1) Click the Setupbutton to open the Setupinterface.
2) On the General Setup tab, click the Database Header User-define button. On the
displayed page, select headers as desired, or move headers using the Up or Down button.
3) Click Save. (To restore to the default setting, click Default, then click Save.)
4) Exit the system and restart the software immediately.
NOTE:
1. Name, Age, and Examining Time are mandatory and cannot be deselected.
2. Attention is always shown in the first row and cannot be moved.
5.12.2.7 Enabling the Report Export Function
1) Click the Setupbutton to open the Setupinterface.
2) On the General Setuptab,selectExportin the Printing area.
3) Click OK.
4) Exit the system and restart the software immediately.
NOTE:
The Export tag is shown on the Report interface only after you select Export on the
General Setup tab.
5.12.2.8 Enabling Sending Report to PACS
1) Click the Setupbutton to open the Setupinterface.
2) On the General Setuptab,selectTo PACS in the Printing area.
3) Click OK.
4) Exit the system and restart the software immediately.
NOTE:
The To PACS tag is shown on the Report interface only after you select To PACS on the
General Setup tab.