C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 59 -
Biopsy Region, you can click on the biopsy image to add a point to indicate an immediate biopsy
region, which is marked as XN(N is the Item number). Information (including the quadrant, clock
direction, and offset) about the biopsy region is automatically shown in the list on the right.
Immediate Biopsy is selected by default, and you can select the lesion grade from the Grade
drop-down list. If Immediate Biopsy is deselected, the biopsy image will show only the lesion
grade (if selected) without a point.
The font of notes on the biopsy image can be set to small (S), medium (M), or large (L). Once a
font is selected, it applies to all notes.
After you add an immediate biopsy region, thePost-examination Noticefield will automatically
add the first term in the remark term list; and when all immediate biopsy regionsare deleted, the
content in thePost-examination Notice field will be cleared.
Figure 5-34
If you want to delete a note, select this note in the list and click Del. Selected Note. If you click
Del. All Notes, all notes in the list and on the biopsy image will be deleted.
If ECC or diagnostic conization is performed, select ECC or Diagnostic Conization.
You can manually input post-examination notice, biopsy pathology and remark or select relevant
terms by using the button next to the field.
5.5.6 Performing RCI Evaluation
NOTE:
1. The RCI Evaluation tab is available only when RCI evaluation is enabled (see
section 5.12.2.13Enabling RCI Evaluation).
To Next Page
Loading...
Need help?
General
