C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 64 -
Once you switch the print template, the principle no longer works.
If you want to have an image shown on the report, drag it from the Current Patient Image list to
the Image area of the report. The original shown image (if any) will be replaced.
Click thePrinttag on the left of the interface to start printing the report.
To obtain an optimal report, you are advised to set the print items first.
NOTE:
1. You can double-click an image in the Current Patient Image list to magnify it, and
double-click the magnified image or click on it to exit magnification.
2. If multiple images are available, click on the left or right of the magnified image to view
the previous or next image.
5.6.2 Changing Print Settings
On the Report interface, click the Setuptag on the left to open the Setuppage.
Figure 5-39
To Next Page
Loading...
