EDAN C6A - Connecting the Power Adapter; Switching on the System; Switching off the System

C3A, C6A, C6A HDVideoColposcope User ManualBasic Operations
- 25 -
CAUTION
When tilting the monitor, be careful not to jam your hands between the monitor supporter
and the monitor.
3.5 Connecting the Power Adapter
Make sure that the AC power supply complies with the following specifications:
Operating Voltage: 100V-240V~
Operating Frequency: 50Hz/60Hz
3.6 Switching on the System
Prior to switching on the system, check if all the components are correctly connected and if all
the cables are in good condition. Then turn on the camera.
If the movable video capture box is used, first turn on its power switch, then the camera.
3.7 Switching off the System
When the examination is completed, exit the video colposcope software.Turn off the camera, and
cover it with the dustproof cover.
If the movable video capture box is used, remember to turn off its power switch when you switch
off the system.