User Manual
Enterprise Access Point
35
4.4 Security
The AP supports various wireless authentication and data encryption methods in each VAP profile. With
this, the administrator can provide different service levels to clients. The security type includes Open,
WEP, WPA-Personal, WPA-Enterprise, and OSEN.
Open: Authentication is not required and data is not encrypted during transmission.
WEP: Wired Equivalent Privacy is a data encryption mechanism based on a 64-bit, 128-bit, or 152-bit
shared key algorithm.
- 802.11 Authentication: Select from Open System, Shared Key, or Auto.
- WEP Key Length: Select a key length from 64-bit, 128-bit, or 152-bit.
- WEP Key Format: Select a WEP key format from ASCII or Hex.
- WEP Key Index: Select a key index from 1~4. The WEP key index is a number that specifies which
WEP key will be used for the encryption of wireless frames during data transmission.
- WEP Keys: Provide the pre-defined WEP key value; the system supports up to 4 sets of WEP
keys.
To Next Page
Loading...
