User Manual
Enterprise Access Point
50
5.2 Service
The administrator can add or delete firewall services here; the services in this list will become options to
choose in firewall rule (when EtherType is IPv4).
The Access Point provides a list of rules to block or pass traffic of layer-3 or above protocols. These
services are available to choose from a drop-down list of layer2 firewall rule edit page with Ether Type
IPv4. The first 28 entries are default services and the administrator can add/delete any extra desired
services.
There are 28 firewall services available in default settings; these default services cannot be deleted but
can be disabled. If changes are made, please click SAVE to save the settings before leaving this page.
To Next Page
Loading...
